TRD0000, TRx Owner’s Manual- Rev. 5.0, January 20, 2005
- 13 -
7.2 Using the (Pride) PG Remote Plus Joystick
The Remote Plus system operates via a joystick that is connected to a controller box on the power
base. The controller contains the primary electronics that operate the power base. By pressing once
on the on/off key, the controller is placed in the standard drive selection mode. To place the con-
troller in power positioning mode, the mode key must be pressed down twice. The power position-
ing mode can now be selected by using the left and right directions on the joystick. The power posi-
tioning function that is selected will be highlighted on the LED Display (see chart). To operate the
selected power positioning function, the forward and reverse directions on the joystick are used. To
return to standard drive selection mode, the mode selection key must be pressed once more.
Note: Please refer to the Pride Owners Manual for complete joystick set-up and operating instructions.
L2
L4
L1
L3
MODE KEY
JOYSTICK
LED
ON/OFF KEY
Function LED
L1 L2 L3 L4
*Tilt/Recline + +
Right Legrest +
Left Legrest +
Both Legrests + +
Elevating Seat +
7.0 Using the Power Base Joysticks
*Push forward on joystick to tilt and pull back on the joystick to recline
(i.e. operates in “auto-reversing mode”)