Installation, Step | IOGear GCS52U manual

Installation

Installation

Step. 1

Before you begin, please turn off the computers you are going to connect to the MiniView™ Micro USB KVM.

If you have never installed a USB mouse and Keyboard on your computer before you may need to leave your PS/2 mouse and keyboard attached during the first boot-up after installing the GCS52U. After you have installed the KVM shutdown your computer and move the PS/2 mouse and keyboard to the GCS52U console port. You have now installed the unit.

1. Connect your monitor VGA cable to the

1

female VGA port (item# 1) on your MiniView™ Micro.

2.Connect your PS/2 keyboard directly into the PS/2 keyboard port (item# 2)

on your MiniView™ Micro.	2
3. Connect your PS/2 mouse directly into	3
the PS/2 mouse port (item# 3) on

your MiniView™ Micro.

7

Image 10

IOGear GCS52U installation manual Installation, Step, Connect your monitor VGA cable to the

Contents

Installation Manual GCS52U 2-Port KVM Switch with Built-in KVM CablesMiniView Micro USB 2003 IOGEAR. All Rights Reserved. PKG-M0073 Page Table of Contents Package Contents This package contains Overview Features Requirements PS/2 connection USB port VGA connection 5. USB connector to the computer Introduction4. VGA connector to the computer 3. PS/2 port for the console mouse Step Installation1. Connect your monitor VGA cable to the 4.Connect the VGA cable item# 4 that is built into the KVM cable of your MiniView Micro to the VGA port on your computer To switch between computers, tap the Scroll Lock key twice Turn the power of your computers onRepeat Step 2 for your second computer Operation Operations Operations con’d n Scan Interval Port is connected to an active computer, and is being accessed in AppendixLED Display Activity Specification Specification Con’d Troubleshooting Troubleshooting Con’d Technical Support Radio & TV Interference Statement Limited Warranty Contact info