Installation, Step, Repeat for your second computer | IOGear GCS52U

Repeat Step 2 for your second computer.

Installation

Step. 3

Repeat Step 2 for your second computer.

Step. 4

Turn the power of your computers on.

To switch between computers, tap the Scroll Lock key twice.

9

Image 12

IOGear GCS52U installation manual Installation, Step, Repeat for your second computer, Turn the power of your computers on

Contents

2-Port KVM Switch with Built-in KVM Cables Installation Manual GCS52UMiniView Micro USB 2003 IOGEAR. All Rights Reserved. PKG-M0073 Page Table of Contents Package Contents This package contains Overview Features Requirements PS/2 connection USB port VGA connection Introduction 4. VGA connector to the computer5. USB connector to the computer 3. PS/2 port for the console mouse Installation Step1. Connect your monitor VGA cable to the 4.Connect the VGA cable item# 4 that is built into the KVM cable of your MiniView Micro to the VGA port on your computer Turn the power of your computers on To switch between computers, tap the Scroll Lock key twiceRepeat Step 2 for your second computer Operation Operations Operations con’d n Scan Interval Appendix LED DisplayPort is connected to an active computer, and is being accessed in Activity Specification Specification Con’d Troubleshooting Troubleshooting Con’d Technical Support Radio & TV Interference Statement Limited Warranty Contact info