Installation, Step | IOGear GCS52U instruction

4.Connect the VGA cable (item# 4) that is built into the KVM cable of your MiniView™ Micro to the VGA port on your computer.

3	4
	Installation

Step. 2

4.Connect the VGA cable (item# 4) that is built into the KVM cable of your MiniView™ Micro to the VGA port on your computer.

5.Connect the USB cable (item# 5) that is built into the KVM cable of your MiniView™ Micro to the USB port on your computer.

5

4

8

Image 11

IOGear GCS52U installation manual Installation, Step

Contents

MiniView Micro USB 2-Port KVM Switch with Built-in KVM CablesInstallation Manual GCS52U 2003 IOGEAR. All Rights Reserved. PKG-M0073 Page Table of Contents This package contains Package Contents Overview Features PS/2 connection USB port VGA connection Requirements 3. PS/2 port for the console mouse Introduction4. VGA connector to the computer 5. USB connector to the computer 1. Connect your monitor VGA cable to the InstallationStep 4.Connect the VGA cable item# 4 that is built into the KVM cable of your MiniView Micro to the VGA port on your computer Repeat Step 2 for your second computer Turn the power of your computers onTo switch between computers, tap the Scroll Lock key twice Operations Operation Operations con’d n Scan Interval Activity AppendixLED Display Port is connected to an active computer, and is being accessed in Specification Specification Con’d Troubleshooting Troubleshooting Con’d Technical Support Radio & TV Interference Statement Limited Warranty Contact info