Operation
Controlling the computers in your MiniView™ ADC installation from a single console is simple.
Manual Port Selection
Simply press the Port Selection push button on the Master View’s top panel to switch between computers (ADC1, ADC2). The Selected LED on the top panel lights to indicate the active port.
➡
Note:
1.If any USB storage devices are attached to the ADC installation, a warning message will appear when manually switching from one computer to the other: “The device you removed was not properly put away. Data might have been lost or damaged. Before disconnecting a device, you should select its icon in the finder and choose eject from the file menu.”
Please ignore this warning message as it will not effect the operation of the GCS602.
2.Miniview ADC does support simultaneous booting, in other words, it only boots the computer that is selected.
3.If system is in sleep mode and you switch ports, the system awakens.
12
