Installation
Step. 1
Before you begin, please turn off the computers you are going to connect to the MiniView™ Micro.
NOTE: to prevent damage to your equipment due to static electric discharge, please make sure that all devices on the installation are properly grounded.
1.Connect your monitor VGA cable to the female VGA port (item# 1) on your MiniView™ Micro.
2.Connect your PS/2 keyboard directly into the PS/2 keyboard port (item# 2) on your MiniView™ Micro.
3.Connect your PS/2 mouse directly into the PS/2 keyboard port (item# 3) on your MiniView™ Micro.
1
2
3
7
