IOGear GDIP201

Before you start the software installation,

If this is the ﬁ rst time you are installing the GDIP201 software please proceed to page 18

If you had purchased the IOGEAR GUC2020D and installed DisplayLink software, then you will only need

to install the IOGEAR USB Server software.

• Please see page 10 for Windows XP installation.

• Please see page 35 for Windows Vista installation.

If you had purchased the IOGEAR GUIP201 and installed the IOGEAR USB Server software installed, then

you will only need to install the DisplayLink software.

• Please see page 14 for Windows XP installation.

• Please see page 39 for Windows Vista installation.