Additional Features/Tips
Anti Cord Wrapping
Select “A/A mount Azi mode” for
Mount Mode/Type
Make sure you hand controller is working at A/A mode. If not, change the mount type to AltAz (under “Set up controller” go to “mount type”)
Error message?: DEC/RA Overcurrent
Check your OTA balance and/or power supply first.
Mount does not move while press an arrow button
Press number 9 to change the slew speed to MAX.
Stop/0
The Stop button is used to stop the tracking. It does not stop slewing. To stop the slewing press the “back” button.
MiniTower II Components
1. | Tripod Lock | 10. | Primary Dovetail Saddle |
2. | Tripod Support Spread | 11. South Mark | |
3. | Tripod Knob | 12. | Altitude Lock |
4. | Tripod Bolt | 13. | Counterweight Shaft Lock |
5. | Tripod Head | 14. Secondary Dovetail Saddle | |
6. | Level Adjustment Screw | 15. Secondary Dovetail Saddle Lock | |
7. | Mount Base | 16. Secondary Dovetail Lock | |
8. | Azimuth Lock | 17. | Counterweight Shaft |
9. | Primary Dovetail Lock | 18. | Bubble Indicator |
5
iOptron Corp. 6E Gill Street Woburn, MA 01801 USA (781) 569‐0200 Toll Free (866) 399‐4587 www.iOptron.com
