6. Using Electronic Eyepiece to Capture Images
For model #8506, with the included 1.3MP iE1300 electronic eyepiece, now you can experience
6.1. iE1300 Driver Installation
The iE1300 is a
The camera is ready for use after the driver is installed.
6.2. Use the iE1300 to Observe an Object
In order to bring an object to your computer monitor, an image/video capture program is needed. Most PCs come with preinstalled programs, such as Window Movie Maker, Arcsoft Webcam Companion, or other webcam program. If your PC does not have one installed or cannot change the camera selection, you may download one from the following website: VirtualDub
Aim and focus your telescope to an observing target using a regular eyepiece. Always start with a low power eyepiece (the one with a large number, such as a 25mm instead of 4mm.) Remove the eyepiece and insert the iE1300 camera into the telescope focuser. Slowly adjust the focuser knob to bring the image to focus. Using “Sync to Target” to bring the interested part to the screen. Use the capture function of the program to capture the image or movie. Practice your system during the daytime first.
6.3. Example: Using Future WinJoe For Image and Video Capture
Install software of Future WinJoe
1.Download Future WinJoe from www.ioptron.com/future.rar and save it on your desktop
25