5. Operate SmartStar® CubeTM-A mount in EQ Mode
The SmartStar can precisely track a celestial object while in the
Please Note: the Park Position of an EQ mode is different from that of an A/A
mode.
Follow the steps below to change the mount from A/A mode to EQ mode:
R.A. Axis (azi axle)
DEC Axis (alt axle)
1.Make sure that the tripod is leveled while in A/A mode.
2.Align the
3.Raise the wedge by loosen the tilt locks, until its tilt angle approximately equals to the observation site latitude;
4.Replace the ALT lock with counterweight shaft if a counterweight is needed.
18