iOptron 9802-W, 9501-W, 9801-W, 9502-W instruction manual Attaching Telescope

	Step 4. Attaching Telescope
Dovetail	Attach telescope to mount using the dovetail lock knob (#2).
lock (#2)

	Step 5. Attaching Optics
	Insert 45º diagonal: Insert diagonal (#6) into the eyepiece side
	of the telescope. Tighten the thumbscrews to a firm feel only.
	Insert the eyepiece: Remove the supplied 25mm eyepiece (#7)
	from its container and slide it into the open end of the diagonal.
45º diagonal	Tighten the thumbscrews to a firm feel only.
	Remove the round dust cover lid from the end of telescope.
(#6)
	Use the focus knob to bring objects into focus. You may need
	to turn the focus knob quite a few turns to focus your telescope
	for the first time. Always start observing using a lower power
Eyepiece (#7)	eyepiece (such as the 25mm eyepiece) to get a wider field of
	view. Later on you can change to higher powers. (Eyepieces of
	higher powers have narrower field of views; it’s more difficult to
	locate objects using high-power eyepieces.)
Focus knob
	Step 6. Connecting Hand Controller
	Plug hand controller into any one of the HBX (handbox) ports on
	the mount.
	Turn on power. Now you are ready to observe. Use the 4 Arrow
	keys (▲▼◄►) to rotate the scope Up, Down, Left, and Right.
	Use the SPEED key to change the slew speed from the slowest
	(2X) to the fastest (MAX).

7