IRIS DC1100E manual Logging, Help command

Using a serial (RS232) 9 pin null modem cable connect your PC’s serial port to the serial console port of IRIS. Now you can use tools such as “HyperTerminal” in Windows to connect to IRIS. The settings for the serial console port of IRIS are

Baud Rate: 57600

Data Bits: 8

Parity: None

Stop Bits: 1

Flow Control: None

After successfully connecting to the console port you should see the IRIS “login” prompt.

Logging In

At the login prompt, type the username as “iris” and hit enter. At the “password” prompt type “123456” or the new password if you have already changed the default password.

After you have successfully logged in you are greeted by the “IRIS>” prompt.

Figure 20 IRIS CLI prompt

“help” command

You can type “?” or “help” on the IRIS prompt to see the list of CLI commands available.

You can type “?” or “help” on the IRIS prompt to see the list of CLI commands available.

IRIS>?
(h)elp	list usage		counters
count	print	packet
rcount	clear	packet	counters
ver	display IRIS		version

Coaxial Networks, Inc. Page 36 of 60