IRiver IHP-140 instruction manual To USE AS a Portable Storage Device

TO USE AS A PORTABLE STORAGE DEVICE

If the player is not connected to the host PC, connect it to the host PC. (Refer to page 10)

The player will show up as a new	Click and Drag files from the PC
drive in Windows Explorer.	to the iHP player.

To delete files or folders from the iHP, select the files (folders) to be deleted and press "Delete" on the keyboard. Click “Yes” when asked to confirm the delete.

The iHP operates just like an additional hard drive in Windows Explorer. Files can be copied, deleted, etc.

Note

When the iHP is attached to a computer for an extended

period of time, be sure to plug in the AC adapter. Low batteries can prevent the proper functioning of the iHP.

TO DISCONNECT THE PLAYER FROM THE HOST PC

Click the 'Safely Remove Hardware" icon in the System Tray.

Click “Stop iRiver iHP-100-Driver(X)” or “Safely Remove TOSHIBA MK1 3GAL USB Disk Drive(X:)”. (Where X is the drive letter assigned to the iHP)

Click OK after confirming the “Safe To Remove Hardware” massage.

Disconnect the USB cable between the iHP and host PC.

Caution

Do not disconnect the player while the drive is in use.

Complete any file copying or DB creation activity before attempting to disconnect the iHP from your PC.

12 13