iRobot Cleaning System owner manual General Troubleshooting

4Priming Scooba’s Pump- Scooba’s powerful cleaning system includes a pump that distributes cleaning solution from the tank onto your floor. To prime Scooba’s pump, fit the end of the included suction bulb over Scooba’s solution valve. Push air through Scooba’s pump system 3 or 4 times.

Solution

Valve

General Troubleshooting

Problem	Likely Cause	What To Do
Scooba will not	Power is off	Press Power, then press Clean to start
start cleaning		Scooba.
	Battery is not charged	Charge Scooba’s battery. (page 11)
	Battery is not correctly	Remove battery and ensure that battery
	seated	tabs are placed inside Scooba’s guide
		holes before closing Scooba’s tank.
Excessive foam	There is too much	Empty and rinse the Clean tank thoroughly.
coming out of Scooba	cleaning solution	When re-filling, make sure to use only 1.5
	concentrate in Clean	ounces of Scooba cleaning solution and
	tank	to fill the Clean tank completely to the rim
		with water.
Cleaning head sticks	Cleaning head is not	With the tank open, slide the cleaning head
out of Scooba, will	closed tightly over the	out of Scooba. Squeeze the cleaning head
not engage	brush	completely closed over the brush before
		re-inserting it into its proper location.
		(page 18)

24iRobot Scooba Owner’s Manual