iSimple IS713 manual Installation, A. WiFli Remote and Mounting Cradle, Mounting options

4. Installation

A. WiFli™ Remote and Mounting Cradle

The WiFli™ remote provides access to many of the basic and advanced features of the WiFli™ explained in Section 5.

Battery installation: Before using the WiFli™ remote, install the supplied battery (CR2025) as illustrated.

+

Mounting options:

1-Dashboard:A strip of hook and loop tape has been provided if dash mounting of the WiFli™ remote is desired. Use the supplied alcohol prep. pad to clean the surface of the chosen mounting location for the remote. Allow surface to dry thoroughly before applying the hook and loop tape to ensure best performance.

2-Steering Wheel Mounting: The WiFli™ mounting cradle is designed to fit snug- ly to your steering wheel for safe and convenient access. Using the supplied attaching strap, tighten the mounting cradle to the steering wheel. The mounting cradle can be installed on either the left or right side of the steering wheel.

Caution!

The WiFli™ mounting cradle gives you quick access to WiFli™ remote while keeping both hands on the wheel. It is designed to be attached to the inside of the steering wheel perim- eter. Position the cradle in an open space so as not to interfere with the deployment of the airbag or other steering wheel operations. Improper installation may lead to injury in the event of airbag deployment.

Removing WiFli™ Remote from the Mounting Cradle: To remove the WiFli™ remote from the mounting cradle, push upwards gently on the remote by placing your fin- ger inside the recess on the side of the mounting cradle.

2