iSimple IS713 manual Troubleshooting, Issue, Resolution

f. Continue using the ►►▐ and ▐◄◄ and  until you have selected a song and it is playing. You should hear this song playing through your radio.

Press the  to go back one step in the browsing menu (this is like pressing MENU on the iPod).

To begin browsing again, press the  4 times to return to the top of the browse menu. Complete steps c, d, e, and f to select the desired song.

Press and hold the MENU button on the remote for 2 seconds to leave the browse menu. Now you can use the ►►▐ and ▐◄◄ to skip to the next track, or previous track.

If your audio playback is not clear (there is static / hiss) you may use the dTECT™ auto scan feature to find a clear signal for use with the WiFli.

Press to activate the dTECT™ technology feature.

Note:

dTECT is a smart FM frequency auto scanning technology developed by iSimple that makes it easier than ever to find a clear, clean channel on which to play an iPod or iPhone. When the dTECT feature is activated, the WiFli™ will automatically locate and lock-on to the best local FM frequency for iPod or iPhone playback. All you need to do is tune your radio to the matching frequency.

Issue	Resolution
My iPod / iPhone shows “waiting for WiFli™”	Disconnect WiFli™ node from iPod / iPhone. Recon-
	nect WiFli™ node into the docking port on the iPod
	/ iPhone
iPod / iPhone shows “Accessory Connected”	Press the MENU button on the WiFli™ remote for
and I can’t manually control my iPod / iPhone	2 seconds; iPod / iPhone will switch back to Basic
	Mode allowing use of the click wheel or touch screen.
No iPod text displayed on my radio.	Verify the radio supports RDS; verify that the radio is
	tuned to the correct frequency
Lots of static or background noise	Run (or re-run) dTECT feature or use manual tuning
	to find a clear frequency

6. Troubleshooting

6