What’s Inside the Box |
|
|
|
|
|
| Page 1 |
|
|
|
|
|
| User Manual |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
L |
|
|
|
|
| Warranty |
|
R |
|
|
|
|
|
|
|
CERULEAN F1 | USB Charging Cable | User’s Guide | Alternate Ear | ||||
Stereo Bluetooth Earphones | Type A to | Warranty Info | hooks | ||||
with Headset functionality. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| CERULEAN TX |
|
| |||
| CERULEAN TX | CERULEAN TX USB Adapter |
| ||||
Pairing the CERULEAN F1 with your CERULEAN TX equipped iPod | Page 2 |
Step 1. Make the CERULEAN F1 discoverable using the following steps:.
•Check that the CERULEAN F1 is powered off and its battery is charged.
•While pressing and holding down the
•When the status LED light on the F1 flashes alternating BLUE/WHITE, release the
Reconnecting the CERULEAN F1 to the CERULEAN TX Equipped iPod | Page 3 |
1.Ensure that the CERULEAN TX is plugged into the iPod and its status LED light is flashing rapidly indicating that it was previously paired with F1.
2.Switch the F1’s power ON.
3.Press and release the
4.The CERULEAN F1 and TX will automatically reconnect after a few seconds.
5.The status light on both the CERULEAN F1 and TX will flash slowly indicating that they have successfully reconnected.
Note: If connection fails, power off the CERULEAN F1 and unplug the CERULEAN TX from the iPod and repeat the steps on page 2.
Wirelessly Stream Audio from Your Mac or PC to the F1 | Page 4 |
|
|
You can stream audio from any application on your Mac or PC to the F1 using the CERULEAN TX USB Adapter and CERULEAN TX.
1.Plug TX into the TX USB Adapter.
2.Plug the TX USB Adapter into the USB port on your computer.
3.Pair the CERULEAN F1 with the TX (See Page 2).
(If you have previously paired the F1 with TX, reconnect the devices as described on page 3)
Mac or PC | USB |
| TX |
Page 5 | |
|
|
You can pair both your mobile phone and the CERULEAN TX equipped iPod with the CERULEAN F1 to listen to your music and accept incoming phone calls.
1.Pair the CERULEAN F1 with your mobile phone (refer to your device's manual).
2.Pair the CERULEAN F1 with your TX equipped iPod (doing so will temporarily disconnect your mobile phone).
3.Using your mobile phone’s Bluetooth menu, select the previously paired iSkin CERULEAN F1 as a headset device.
Note: While listening to music from the TX equipped iPod, the F1 is in stereo earphone mode and may be used to control the iPod. Upon an incoming phone call, the F1 will switch to mono headset mode and may be used to control your mobile phone. After terminating a phone call, the F1 returns to stereo
Stereo Bluetooth 2.0 |
Transmitter for iPod |
Getting Started
Charging the Battery:
It is recommended that you charge the CERULEAN F1's battery at least 6 hours prior to first use; however, subsequent charges require only
USB |
|
| USB AC Power Adapter | |
Mac / PC | or | Output: 5V(DC) | ||
| ||||
|
|
| (sold separately) |
Using the included USB charging cable, plug the smaller end of the cable into the CERULEAN F1 USB port and the wider end into the USB port on your computer. The following chart describes battery status indicated by the Status LED light located in the centre of the
Note: The CERULEAN F1 will remain discoverable for approximately 3 minutes.
PRESS and HOLD | SWITCH | Flashing Light BLUE/ |
the power ON | WHITE (discoverable) |
Step 2. Connect the CERULEAN TX to the iPod as shown.
The CERULEAN TX and F1 will automatically pair within 20 seconds. Music from your iPod can be heard on the CERULEAN F1 when successfully paired.
How to wear the CERULEAN F1
Wearing the CERULEAN F1
Following the diagram, install the CERULEAN F1 over each ear and ensure the right (R) and left (L) earpieces are correctly placed. Then adjust ear hooks for a secure and comfortable fit.
Swapping Ear Hooks
Included with the CERULEAN F1 is an additional pair of ear hooks. These ear hooks feature a different design and may offer a better fit.
Warning!
A headset that covers both earsWarningm y impair your
Correct ear hook position
TX + TX USB Adapter | TX USB Adapter | F1 Headset |
Note: Only the volume controls and Play/Pause functions on the F1 are available when using TX with your computer. You may also adjust the volume using the application’s volume controls on your computer.
The Status LED Light on both the TX and F1 will begin to flash rapidly and automatically pair within twenty seconds. See below for selecting TX as your computer’s output device.
Selecting CERULEAN TX for audio output streaming on your computer.
The iSkin CERULEAN TX will appear as a USB speaker on your Mac/PC. No additional software or setup is required.
1.Choose "System Preferences" from the Apple Menu.
2. Select the "Sound" preference pane.
3. Select the "Output" Tab. |
earphone mode and resumes music playback. This ability will dependent on mobile phone features.”
iPod Compatibility
iPod mini | iPod | iPod | iPod touch |
1st genereation | 4th generation | 5th generation | 8GB 16GB |
4GB | 20GB | (video) |
|
|
| 30GB |
|
iPod mini | iPod | iPod | iPod Classic |
2nd generation | 4th generation | 5th generation | 6th generation |
4GB 6GB | 40GB | (video) | 80GB 160GB |
|
| 60GB 80GB |
|
iPod nano | iPod |
| iPod nano |
1st generation | 4th generation (clour display) | 3rd generation | |
1GB 2GB 4GB | 20GB 30GB |
| 4GB 8GB |
Status Light | Colour | Status / Description |
ON | BLUE | Battery charging in progress |
|
|
|
ON | WHITE | Battery charging completed |
|
|
|
FLASHING | BLUE | Low battery indicator. Charging required. In addition, a low battery |
Note. The CERULEAN TX is powered by the iPod and does not contain a battery. It is designed to self power off to conserve the iPod’s battery life when:
A. The iPod has been powered off
B. The CERULEAN TX is unable to establish a connection with the CERULEAN F1 within one minute.
Status LED light on TX flashes 
ability to hear environmental sounds. Use of this headset while operating a motor vehicle or riding a bicycle may pose a serious hazard to your personal safety and is not recommended.
Right earpiece contains all controls and microphone.
4. Select "iSkin CERULEAN TX" from the list of available sound output devices. |
1.Select START g Control Panel.
2.Choose the "Sound and Audio Devices" control panel.
iPod nano | iPod |
2nd generation | 4th generation (clour display) |
2GB 4GB 8GB | 40GB 60GB |
sound will alert you when recharging is necessary (3% or below) |
Note: Longer distances between paired devices and higher volume levels impact battery performance. To conserve battery life, turn the power off when not in use.
It is thus necessary to remove and
rapidly as it attempts to pair with the CERULEAN F1.
Note: When removing ear hooks, be sure to firmly hold the CERULEAN F1 securely and carefully snap off the hook from the base. Snap replacement ear hooks over the base while ensuring they are facing the correct direction (see diagram above).
3. Select the "Audio" tab.
4.Select "iSkin CERULEAN TX" as the default device from the "Sound playback" list.
It is important that your iPod is up to date with the latest iPod software.
For more information visit: www.apple.com/support
