Change the display name of a Bluetooth partnership

1.Press Start , tap Wireless Manager, and then tap Menu > Bluetooth Settings.

2.Tap and hold the device name, and then tap Edit.

3.In the Display Name box, enter a new name for the partnership, and then tap Save.

Connect to a computer using Bluetooth

Connect to a Bluetooth-enabled computer using ActiveSync or Windows Mobile Device Center.

1.Follow the instructions in the synchronization software help on the computer for configuring Bluetooth on your computer to support ActiveSync.

2.Press Start , tap Tools > ActiveSync.

3.Tap Menu > Connect via Bluetooth. Make sure your iPAQ and computer are within close range.

NOTE: If this is the first time you have connected to this computer through Bluetooth, complete the Bluetooth wizard on your iPAQ and set up a Bluetooth partnership with the computer.

4.Tap Sync.

5.To disconnect when you do not require the Bluetooth connection, tap Menu > Disconnect.

TIP: To preserve battery power, turn off Bluetooth when not in use. For best results, connect your iPAQ to the computer using a USB cable to establish a synchronization before connecting through Bluetooth.

Use your iPAQ as a wireless modem with Bluetooth

Use your iPAQ as a wireless modem to connect your Bluetooth-enabled computer to the Internet. For more information, see Use your HP iPAQ Glisten as a wireless modem on page 135.

Set up an incoming or outgoing Bluetooth communications (COM) port

1.Make sure your iPAQ is connected to the other device through Bluetooth.

2.Press Start , tap Wireless Manager, and then tap Menu > Bluetooth Settings.

3.Tap the COM Ports tab.

4.Tap New Incoming Port or New Outgoing Port.

NOTE: New Outgoing Port is available only if at least one Bluetooth device supports serial (COM) connection.

5.Select a numbered COM port from the list.

NOTE: If the port cannot be created, it is already in use. Select a different numbered port.

114 Chapter 21 Use Bluetooth