Print documents and information with JetCet Print

Use JetCetTM Print to print information from your iPAQ to a compatible printer using Bluetooth, Wi-Fi, or USB. You can print .doc, .xls, .jpg, .bmp, and .html files.

To configure a printer using Wi-Fi:

NOTE: Make sure that Wi-Fi is on before configuring a network printer. See Use Wireless Manager on page 108.

1.Press Start , tap Tools > JetCet Print.2.Tap Add Network Printer.

3.Enter the IP address of the printer or the domain name in the Printer IP Address or Domain Name box.

4.Tap Next.

5.Configure the required settings and tap Done.

To configure a printer using Bluetooth:

NOTE: Make sure that Bluetooth is on before configuring a Bluetooth printer. See Use Wireless Manager on page 108.

1.Press Start , tap Tools > JetCet Print.

2.Tap Add Bluetooth Printer.3.Tap Select to search.

4.Tap the printer to print, and then tap Next.

5.Configure the required settings, and then tap Done.

To configure a printer using USB:

NOTE: Make sure that your iPAQ is connected to printer with a USB cable before configuring a USB printer.

1.Press Start , tap Tools > JetCet Print.

2.Tap Add USB Direct Printer.

3.Enter the printer name in the Printer Nickname box.

4.Tap Yes to print a test page.

5.Tap Finish.

Print documents and information with JetCet Print 91