HP iPAQ Glisten-AT&T NOTE:, Camera, Camera, Camera, Capture settings, Basic capture settings:, Adjust brightness, saturation, and sharpness:

To select a capture mode using the Navigation ring:

1.To open the camera, press Start , and then tap Camera. Or, on the keyboard, you can press and hold .

NOTE: On the keyboard, you can also press and hold to open the camera.

2.Tap the camera settings icon .

3.To select a mode, press up or down on the Navigation ring.

Camera settings

Using the camera settings, you can customize the photo capture process and how your photos and videos will appear.

Basic capture settings:

1.To open the camera, press Start , and then tap Camera. Or, on the keyboard, you can press and hold .

2.Tap the settings icon .

3.Tap the capture settings icon .

4.Use the Capture settings screen to set:

●Time lag for the timer

●Number of photos to capture in Burst mode

●Location (storage card or iPAQ) where you store your photos and videos

●Shutter sound

●Video format

●Voice in video

●Flicker frequency

●Time stamp on photos

●Quality of photos

●Orientation of panoramic photos

Adjust brightness, saturation, and sharpness:

1.To open the camera, press Start , and then tap Camera. Or, on the keyboard, you can press and hold .

2.Tap the settings icon .

94 Chapter 17 Take photos and video