Battery saving tips

To conserve battery power, take a look at the following tips:

●Turn off Bluetooth when not in use. Press Start , tap Settings > Bluetooth > Mode tab, uncheck Turn on Bluetooth, and then tap OK.

●Turn off Wi-Fi when not in use. Press the Wi-Fi button on the top of your iPAQ.

●Adjust power settings. Press Start , tap Settings > Power. On the Advanced tab, select the Turn off device if not used for box, and then from the list, select a time limit.

●Adjust backlight. Press Start , tap Settings > System > Backlight. On the Battery Power tab, select the Turn off backlight if device is not used for box, and then from the list, select a time limit.

●Adjust how often your iPAQ downloads email. Press Start , tap Tools > ActiveSync > Menu > Schedule. To save battery power, adjust the schedule to receive email less often.

NOTE: If your battery completely discharges, you may lose data that has not been saved on your iPAQ.

View hardware and software information about your HP iPAQ Glisten

Using the HP Device Information application, you can view your iPAQ serial number, operating system information, and other information about memory, display, system, camera, keyboard, Bluetooth, Wi- Fi, GSM, and GPS.

To open the Device Information application:

▲Press Start , tap Settings > System > Device Information. Click on a tab to view technical information.

To view the serial number:

▲In the Device Information application, tap the Identify tab.

To view the model number:

▲In the Device Information application, tap the System tab.

If your phone is turned off or you are unable to turn on your phone, you can view the serial number and model number printed under the battery of your iPAQ:

1.Remove the battery cover.

2.Remove the battery.

3.Read the label attached to the back of your iPAQ under the battery.

Battery saving tips 37