HP Glisten-AT&T manual Set up an automatic choice for connections, Set up a VPN server connection

Set up an automatic choice for connections

If you have already created more than one connection, you can set up your iPAQ to connect to the best available connection automatically.

1.Press Start , tap Settings > Connections > Connections > Tasks tab.

2.Under iPAQ WAP or My Work Network, tap Add a new modem connection to create a new connection.

3.After you create a new connection, under iPAQ WAP or My Work Network, tap Manage existing connections.

4.Tap Auto pick.

NOTE: For the Auto pick option to be available, you need more than one connection to be set up.

5.Tap OK.

Set up a VPN server connection

A VPN connection enables secure connectivity to your corporate network through the Internet.

NOTE: Contact your IT network administrator to configure a VPN connection.

Before you begin, obtain the following information from your network administrator:

●User name

●Password

●Domain name

●TCP/IP settings

●Host name or IP address of the VPN server To set up a VPN server connection:

1.Press Start , tap Settings > Connections > Connections > Tasks tab.

2.Under My Work Network, tap Add a new VPN server connection and follow the instructions in the New Connection wizard.

3.Under most circumstances, you should not change any advanced settings. However, you need to change advanced settings when:

●The server to which you are connecting does not use dynamically-assigned addresses, and you need to enter your TCP/IP settings.

●You need to change server DNS or WINS settings that you can obtain from your network administrator.

Set up an automatic choice for connections 131