Charge your HP iPAQ Glisten

CAUTION: To avoid damaging your iPAQ or AC adapter, make sure that all the metal connectors are correctly aligned before connecting.

Your iPAQ will fully charge in approximately 2–4 hours. Charging might take more time when your iPAQ is connected to a powered computer or non-HP accessories.

To charge the battery:

1.Plug the USB sync cable into the phone.

2.Attach the USB sync cable to the power adapter.

3.Plug the power adapter into a standard AC outlet.

TIP: Charge the battery by connecting your iPAQ to a USB port on your computer using the USB sync cable. If Microsoft® ActiveSync® or Windows Mobile Device Center (WMDC) is installed on your computer, it appears on your computer screen.

USB charging is enabled by default on your iPAQ. To disable USB charging, press Start , and

then tap Settings > Power > USB Charging tab. On the Power screen, clear the Use USB Charging check box, and then tap OK.

Charge your HP iPAQ Glisten 7