HP iPAQ Glisten-AT&T Yes, Lock, NOTE:, Confirm, Password, Password, Password, Settings > Lock, Prompt if phone unused for

PIN setup and lock screen

You can set up a PIN (Personal Identification Number) to protect your phone. After you set up a PIN and then lock your phone, you will need to enter the PIN you created to unlock your phone. You can also select the amount of time that your phone is unused before it automatically locks.

When your phone is locked, you are able to answer incoming calls and view your next appointment.

From the locked screen, you can tap the lock icon , and then the missed call, voicemail, email, or text message icon is displayed. Tap and slide the icon to go directly to the missed call or message.

1.Press Start , and then tap Settings > Lock.

2.On the Password screen, select the Prompt if phone unused for box, and then from the list select the amount of minutes.

3.In the Password type list, select Simple PIN or Strong alphanumeric.

NOTE: The simple PIN contains numbers only. The strong alphanumeric password type contains numbers, letters, or symbols.

4.In the Password and Confirm boxes, enter a password, and then tap OK.

5.In the Password dialog box, tap Yes.

▲To lock your phone, press Start , and then tap Lock. After you lock your phone, the lock screen is displayed.

16 Chapter 4 Getting started with your HP iPAQ Glisten