Ives 232TGSL manual Lubrication, Installation, Specifications, Dwg. TPD905--2

LUBRICATION

Ingersoll-Rand No. 50 Ingersoll-Rand No. 100

Always use of an air line lubricator. We recommend the following Filter-Regulator-Lubricator Unit (FRL):

Inside USA use FRL unit # C28-04-FKG0-28 Outside USA use FRL unit # C28-C4-FKG0

After each eight hours of operation, if an airline lubricator is not used, remove the Oil Chamber Plug (17) and fill the oil chamber with Ingersoll-Rand No. 50 Oil.

After each eight hours of operation, or as experience indicates, inject about 4 cc of the Ingersoll-Rand No. 100 Grease into the Grease Fitting (16).

INSTALLATION

	Main Line(s) Inner Ø			Branch Line(s) Inner Ø
	to be 3X Size of			to be 2X Size of
	Air Tool’s Inlet Ø			Air Tool’s Inlet Ø
	To Air
	System
	To Air
	Tool
	Emergency	L	R	F
	Shut--Off
	Valve
	Lubricator	Regulator		Filter
		FRL
	Drain Regularly			Compressor
				(Dwg. TPD905--2)
		SPECIFICATIONS
Model	Handle			Drive	Recommended Torque Range
I.D.	Type			inches	ftSlb (NSm)
232TGSL	pistol			1/2 sq.	40-400 (64-542)

3