Components and Installation | J. A. Henckels GFB760, GFC720, GFC1020

Hand-tighten sink flange

Installation Instructions

1COMPONENTS AND INSTALLATION

COMPONENTS

	*Stopper
	*Removable
	Splash Guard
	Sink Flange
	Rubber Sink
	Flange Gasket
Sink Flange		Sink

Assembly	Fiber Gasket

	Support Ring
	(Note Arrows
	Indicating Up)
	Mount Ring
	Tightening Ears
	Cushion Mount
Groove	Dishwasher
	Discharge Inlet
	Elbow Gasket
Hopper
Disposer		Screws
	Elbow	Discharge
End Bell	Flange
		Elbow
(Electrical
	Rating Label
Connections)
	in This Area

*Not used with batch feed model

INSTALLATION OF SINK FLANGE

(Read completely before starting.)

Correctly Installed Sink Flange

	Sink Flange	Rubber Gasket
	Fiber Gasket	Sink
	Fiber Gasket	Support Ring
	Bottom Bead of	Support Ring
	Bottom Bead of	Sink Flange
	Cushion Mount	Sink Flange
	Cushion Mount
	Open Area No Obstruction	Mount Ring should be free
		to move up and down

Groove

Cushion Mount

Bottom Bead

(shown for proper orientation)

NOTE: Pay close attention to the order of the sink flange parts, as they have been correctly assembled by the factory.

A. Disassemble the sink flange assembly from the disposer by turning the mount ring to the left (clockwise) and removing it.

B. Raise the mount ring toward the top of the sink flange. Remove the cushion mount and the mount ring. You may want to practice installing the cushion mount at this point before you are under the sink.

C. Unscrew the support ring from the sink flange and remove the fiber gasket. You are now left with the sink flange and the rubber gasket.

D. The rubber gasket is used instead of plumbers putty with stainless steel sinks.

E. If no putty is used, insert the sink flange through the rubber gasket into the sink opening. Do not turn the flange once it is seated.

F.If you use putty instead of the gasket, form a ring around the underside of the sink flange. Insert the flange into the sink opening, press down hard to squeeze out excess putty. From under the sink, trim off excess putty flush with the bottom edge of the sink opening. Use putty sparingly on cast iron sinks.

G. From underneath the sink, slip the fiber gasket onto the exposed sink flange. With

arrows pointing up, screw the support ring onto the sink flange and hand tighten until the sink flange will not move. At

this point you may want to insert the stopper in the sink and fill with water to check the sink flange seal and insure there are no leaks.

H.Place the mount ring over the sink flange and hold in place while installing the cushion mount (large side down). Make sure the groove on the inside of the cushion mount fits over the

lip on the sink flange,			Cushion Mount Detail
similar to putting the lid			Top
on a plastic container.		Groove
on a plastic container.
Run your fingers	Bottom
around the entire	Bottom
cushion mount with	Bead
cushion mount with

slight pressure. Do not press too hard. When the cushion mount is properly seated, the mount ring can be pulled downward over the cushion mount and will be free to turn.

GFC1020, GFC530, GFC720, GFB760, GFC320 specifications

J.A. Henckels is a brand renowned for its high-quality kitchen knives and cutlery. Among their impressive range, the GFC520, GFC320, GFB760, GFC720, and GFC530 models stand out for their innovative features and exceptional performance, appealing to both professional chefs and home cooking enthusiasts.

The GFC520 is distinguished by its sleek design and ergonomic grip, ensuring comfortable handling during extended use. This model incorporates a high-carbon stainless steel blade, which offers superior sharpness and edge retention. Its full tang construction provides excellent balance and control, making it an ideal choice for precision cutting tasks. Additionally, the GFC520 is dishwasher safe, allowing for easy cleaning and maintenance.

Similar to the GFC520, the GFC320 boasts high-carbon stainless steel with a precision-forged blade that ensures unparalleled durability. It features an innovative triple-riveted synthetic handle, providing enhanced grip and stability. The GFC320 is particularly popular for its versatility, effortlessly handling various cutting tasks from slicing meats to chopping vegetables.

The GFB760 is designed specifically for culinary professionals, offering premium performance. It features a unique bolster design that allows for a seamless transition between the blade and handle, improving safety and control. The blade is engineered for exceptional sharpness and durability, enabling chefs to tackle the most demanding cooking environments with confidence.

In the GFC720 model, Henckels employs advanced technology to enhance blade performance. The ice-hardened steel undergoes a special treatment that optimizes hardness and improves resistance to corrosion. This results in a knife that maintains its sharp edge longer, reducing the need for frequent sharpening. The GFC720 is also lightweight, making it easy to maneuver during preparation.

The GFC530 is a versatile option that combines the qualities of the other models. It features a robust blade made from high-quality stainless steel and an ergonomic handle designed for comfort during use. This model emphasizes ease of use, providing a reliable choice for everyday cooking tasks.

Overall, the J.A. Henckels GFC series showcases a commitment to quality and innovation. With features such as high-carbon stainless steel blades, ergonomic designs, and advanced technologies, these knives are built to enhance the culinary experience, making them essential tools in any kitchen. Whether you're a professional chef or a home cook, the GFC520, GFC320, GFB760, GFC720, and GFC530 offer the performance and reliability needed to elevate your culinary creations.

J. A. Henckels GFB760, GFC720, GFC1020 Components and Installation, Installation of Sink Flange

Models: GFC1020 GFC530 GFC720 GFB760 GFC320 GFC520