Gigabyte GA-7N400S-L user manual Installation of the CPU, Installation of the Heatsink, English

English

1-4-1 Installation of the CPU

Pin 1(indented corner)

Position lever at a 90-degree angle

	indented corner
Fig. 1	Fig. 2
Gently lift the CPU socket lever and up to a	A gold-colored triangle is marked one edge of the
90-degree angle.	CPU. Please align this edge with the socket edge
	closest to the CPU lever. Gently place the CPU into
	position making sure that the CPU pins fit perfectly
	into their holes.
	Once the CPU is positioned into it socket, gently
	press the metal lever back into its original position.

A Socket A CPU has two indented corners and these corners must be properly positioned during installation.

1-4-2 Installation of the Heatsink

Fig. 1

Before installing the heat sink, please first add an even layer of heat sink paste on the surface of the CPU. Install all the heat sink components (Please refer to the heat sink manual for detailed installa- tion instructions).

Fig. 2

Please connect the heat sink power connector to the CPU _ FAN connector located on the motherboard so that the heat sink can properly function to prevent CPU overheating.

The heatsink may adhere to the CPU as a result of hardening of the heatsink paste. To prevent such an occurrence, it is suggested that either thermal tape rather than heat sink paste be used for heat dissipation or using extreme care when removing the heatsink.

GA-7N400S(-L) Motherboard - 12 -