Gigabyte GA-7N400S-L user manual Completing the RAID BIOS Setup, English

English

Completing the RAID BIOS Setup

After assigning your RAID array disks, press F7. The Clear disk data prompt appears.

		NVIDIA RAID Utility		Aug 24 2004
		- Define a New Array -
RAID Mode: Mirroring			Striping Block: Optimal
Free Disks		Clear disk dataArray? Disks
Loc	Disk Model Name		Loc		Disk Model Name
				1.0.M	ST3120026AS
		[Y] YES [N] NO			ST3120026AS
		[	] Add	1.1.M
		[	] Del
	[F6] Back	[F7] Finish [TAB] Navigate		[	] Select [ENTER] Popup

Press Y if you want to wipe out all the data from the RAID array, otherwise press N. You must choose Yes if the drives were previously used as RAID drives. The Array List window appears, where you can review the RAID arrays that you have set up.

You can select a disk array as boot device if you want to boot operating system from an array. Use the arrow keys to select the array, then press B to specify the array as bootable.

		NVIDIA RAID Utility			Aug 24 2004
				- Array List -
Boot	Id	Status		Vendor	Array Model Name
BBS	2	Healthy		NVIDIA	MIRROR 111.79G
[Ctrl-X] Exit	[	] Select	[B] Set Boot		[N] New Array [ENTER] Detail

GA-7N400S(-L) Motherboard - 66 -