![](/images/new-backgrounds/1108155/108155147x1.webp)
Setting the billing-code configuration
HP MFP Send Fax supports the use of billing codes when sending faxes.
To enable or disable the
1.On the MFP control panel, press Menu.
2.Scroll to and touch FAX.
3.Scroll to and touch FAX SEND.
4.Scroll to and touch BILLING CODE.
5.Touch CUSTOM to open the
6.Use the up and down arrows to select the minimum number of digits in the billing code.
7.Touch OK to enable the
NOTE: If the
To enable or disable the
1.On the MFP control panel, touch Administration.
2.Scroll to and touch Initial Setup.
3.Scroll to and touch Fax Setup.
4.Scroll to and touch Fax Send Settings.
5.Scroll to and touch Billing Codes.
6.Touch Custom to open the
7.Use the up and down arrows to select the minimum number of digits in the billing code.
8.Touch OK to enable the
NOTE: If the
68 Chapter 3 Configuration | ENWW |