Jabra 410 Installation, Connecting, Setup, Call Functions, Jabra PC Suite, Basic functions, Event

INSTALLATION

Jabra PC Suite

Jabra PC Suite is a collection of software designed to support the Jabra SPEAK 410.

Download and install Jabra PC Suite from www.jabra.com/pcsuite.

CONNECTING

To connect the Jabra SPEAK 410, connect the USB cable attached to the speakerphone to any available USB port on a PC or power-supplied hub. The Jabra LED will light up white to indicate the speakerphone is connected and powered on.

Note: The speakerphone must be connected to a PC USB port or power-supplied hub, and not a bus-powered USB port (such as a keyboard with an integrated USB).

SETUP

When the Jabra SPEAK 410 is connected to a PC, Windows will automatically configure the speakerphone as the default audio device.

To manually change the default audio device in Windows:

1.Click on Windows Start and then launch Windows Control Panel.

2.Open Sound and Audio Devices, and select the Audio tab

3.Under Sound Playback, and Sound Recording, set the preferred audio device as the default device. Click apply to save the settings.

CALL FUNCTIONS

Basic functions

Event	Action
Make a call	Dial the phone number using the PC (softphone)
Answer an incoming call
	Tap the green handset button
End a current call, or reject an incoming call	Tap the red handset button

Mute/un-mute the Microphone

Tap the mute button to toggle between mute/un-mute. When muted, all LEDs will light up red. When the speakerphone is ringing, or when a call is ended, the microphone will always be un-muted.

Increase/decrease Speaker Volume

Tap (or press and hold) the + / – buttons.

The speakerphone volume has a twelve-step scale, indicated by twelve white LEDs arranged in a circle on the speakerphone.

JABRA SPEAK 410 USER MANUAL

4