7.5How to Change the Advanced settings
Four advanced settings can be configured using the base. Voice prompts indicate the current setting and value. The four settings are:
• Audio protection.
• Wireless range.
• Auto sleep mode.
• Remote call control.
1 | Start setup mode | SETUP |
• | Put on the headset. | |
• | Simultaneously press and hold both headset volume | Start |
| buttons until the voice prompt says “Setup” and then | setup |
| release the buttons. |
|
2Setup mode
•The headset buttons are used to cycle through the settings and values.
•The base lights 
,or voice prompts are used to indicate which setting and value is currently selected.
| Settings |
| Values | |
Cycle |
|
| Cycle |
|
through |
|
| through |
|
settings |
|
| values |
|
Base light | Setting |
| Base light | Value |
| Audio protection |
| Peakstop (default) | |
flash x1 |
| Peakstop and IntelliTone | ||
|
|
| ||
|
|
|
| Normal (default) |
flash x2 | Wireless range |
| Low | |
|
|
| Very low | |
|
|
|
| |
| Auto sleep mode |
| Off (Default) | |
flash x3 |
| On | ||
|
|
| ||
|
|
|
| |
| Remote call control |
| GN1000/RHL/none | |
|
|
| ||
|
|
|
| Jabra IQ |
flash x4 | (some phones may not be |
| DHSG | |
| ||||
| manually configured) |
| Siemens Optipoint | |
|
|
|
| |
|
|
|
| MSH |
3 End setup mode |
|
| GOODBYE | |
When finished, simultaneously press and hold both |
| |||
|
| |||
headset volume buttons until the voice prompt says | End |
| ||
“Goodbye” and then release the buttons. | setup |
| ||
The base will restart and update the settings, indicated |
|
| ||
by the white battery icon | on the base. |
|
| |
|
| Jabra PRO 920 |
| |
english
20
