Jabra BT100 user manual Note The default headset pass key is

Models: BT100

1 101
Download 101 pages 12.48 Kb
Page 6
Image 6

2.Within the 3 seconds, open the boom.The LED will remain on and the headset is now in pairing mode and will remain in pairing mode for 5 minutes.

Perform a “device discovery” from the mobile phone. For details on device discovery consult your phone user guide. Please Note: it may take several seconds to establish connections.

3.Enter the passkey 0000 , when your phone menu prompts you, and the phone will start to pair the headset with the phone (the device ID is now stored in the phone’s memory).

4.Your phone screen will advise that pairing has been successful, and the headset indicator light flashes to let you know this also.

5.If the pairing is unsuccessful. Please return to step 1 and follow the steps 1-4.

6.Once the headset and phone have successfully paired you are ready to place and receive calls (see page 15 “Making a Call”).

7.Please note that once paired the first time, the headset automatically connects to your phone upon opening the boom.

(Note:The default headset pass key is 0000.)

c)8 Paired Devices (Audio Mode1/Audio Mode2 Operation)

It is possible for your headset to store pairing data with 8 different Bluetooth devices. This means that you could have 8 Bluetooth phones paired, or 1 phone and 1 other device. Operation of the headset in Audio Mode1 will recall the last device that the headset paired to while in Audio Mode1. Similarly, operation in Audio Mode2 will recall the last device that the headset paired to while in Audio Mode2.

To toggle between audio modes, simply follow the procedure below.

1.Starting with the boom in the closed position, enter Configuration Mode as described on page 9.

2.With boom still closed, and the indicator light on solid (indicating Configuration Mode) press either Volume button.

3.Watch the indicator light (one flash for Audio Mode1 or two flashes for Audio Mode2, then off).

4.Open boom and verify repeated indicator light flash signal. (Single flash for Audio Mode1, double flash for Audio Mode2).

5.Now the headset is ready for use in the selected mode, just follow pairing the headset on page 9.

10

11

Page 6
Image 6
Jabra BT100 user manual Note The default headset pass key is