Please note: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period. We therefore recommend that you recharge your device at least once a month.
Turning your headset on and off
•Press the answer/end button until you see a burst of flashes on the indicator light (LED) to turn your headset on.
•Press and hold the answer/end button until you see a burst of flashes on the indicator light (LED) to turn the headset off.
Please note that the LED indicator light turns off after 1 minute to save battery. Headset is still active, and light will flash again after tap on the answer/End button or any call activity. To check if the headset is on, tap the answer/end button once – the LED indicator light will flash, if the headset is on.
Pairing it with your phone
Headsets are connected to phones using a procedure called ‘pair- ing’. By following a few simple steps, a phone can be paired with a headset in a matter of minutes. (See fig. 3)
1. Put the headset in pairing mode
•When you turn on your Jabra BT2010 for the first time, the headset will automatically start up on pairing mode – i.e. it is discoverable for your phone. When the headset is in pairing mode the LED is constantly lit.
2. Set your Bluetooth phone to ‘discover’ the Jabra BT2010
•Follow your phone’s instruction guide. First make sure that Bluetooth is activated on your mobile phone. Then set your phone to discover the headset. This usually involves going to a ‘setup,’‘connect’ or ‘Bluetooth’ menu on your phone and select- ing the option to ‘discover’ or ‘add’ a Bluetooth device.*
english
Jabra BT2010 Bluetooth headset
