3. Your phone will find the Jabra BT2010
•Your phone will find the headset under name “Bluetooth head- set”. Your phone then asks if you want to pair with the headset. Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with the passkey or PIN = 0000 (zeros). Your phone will confirm when pairing is complete.
Fig. 3
12
In case of unsuccessful pairing, put the Jabra BT2010 into pairing mode manually. Make sure the headset is off. Press and hold the answer/end button for approximately 5 seconds until the LED has a constant light.The LED will flash before the light is constant –
keep holding down the button until light is constant.
3 | 4 |
english
Jabra BT2010 Bluetooth headset | * Phone dependent |
