7
english
Jabra bt2080
Mute/un-mute
- to mute, press both volume up and down at the same time.
a low beep alert plays during a muted call.
- to un-mute, tap either of the volume buttons.
Call waiting and placing a call on hold*
- this lets you put a call on hold during a conversation and
answer a waiting call.
- Press the answer/end button once to put the active call on hold
and answer the waiting call.
- Press the answer/end button to switch between the two calls.
- tap the answer/end button to end the active conversation.
HoW tHe stAtUsDIsPLAY™ WoRKs
bluetooth
Indicator
Indicates if your headset is connected to your
phone
- Solid light means headset is connected to your
phone
- Flashing light means headset is in ‘pairing
mode’ and ready to be connected to a new
phone
battery
Indicator
Indicates battery level and if headset is
turned ON
- Green light indicates that the headset has more
than 10 minutes of talk time remaining
- red light indicates that the headset has less
than 10 minutes of talk time remaining
to save battery the Jabra StatusDisplay™ is turned o after 3 seconds.
Get an instant status from the Jabra StatusDisplay™ by a tap on
any button on the headset when you are not on a call.
* Phone dependent