Turning your headset on and off
-Slide the on/off button forward on the side of the headset to turn on the headset.. The LED will flash green for a second when the headset is on..
-Slide the on/off button backward to turn off the headset..
Pairing it with your phone
Headsets are connected to phones using a procedure called ‘pairing’.. By following a few simple steps, a phone can be paired with a headset in a matter of minutes..
1. Put the headset in pairing mode
-When you turn on your Jabra BT530 for the first time,the headset will automatically start up in pairing mode – i..e.. it is discoverable for your phone.. When the headset is in pairing mode the LED is constantly lit..
2. Set your Bluetooth phone to ‘discover’ the Jabra BT530
-Follow your phone’s instruction guide.. First make sure that Bluetooth is activated on your mobile phone.. Then set your phone to discover the headset.. This usually involves going to a ‘setup,’‘ connect’ or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add’ a Bluetooth device..*
3. Your phone will find the Jabra BT530
-Your phone will find the headset under name “Jabra BT530”.. Your phone then asks if you want to pair with the headset.. Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with the passkey or PIN = 0000 (4 zeros).. Your phone will confirm when pairing is complete..
In case of unsuccessful pairing, put the Jabra BT530 into pairing mode manually.. Make sure the headset is on.. Press and hold the answer/end button for approximately 5 seconds until the LED has a constant light.. Keep holding down the button until light is constant..
english
Jabra bt530 | 5 |
