5
enGlish
Jabra JX20 Pura
Charging your headset from your deskstand:
What you see What this means
led o no device in deskstand
1st. led solid device in deskstand
1st. led solid, 2nd. led pulsing 0-25% charged
1+2 led solid, 3rd. led pulsing 25-50% charged
1+2+3 led solid, 4th. led pulsing 50-75% charged
1+2+3 +4 led solid, 5th. led pulsing 75-100% charged
all led´s solid fully charged
Check Battery status:
• When you are not in a call, tap either volume button.The led
will ash in accordance with the aC adapter/usb charger
sequence above.
turninG your headset on and off
• Gently turn the earpiece 90° clockwise to turn on the headset
(see g. 1).
• Gently turn the earpiece 90° anti-clockwise to turn o the
headset (see g. 1).
PairinG it With your Phone
The rst time you turn on your Jabra JX20 Pura it will automatically
enter pairing mode. In this case skip directly to point 2 below.
When pairing with a second device, or if you need to pair
manually, start with point 1 below.
1. Put the headset in pairing mode:
• Turn the headset on.
• Press and hold the answer / end button until the led on the
back shines continuously.