![](/images/new-backgrounds/1256714/25671411x1.webp)
A. REMOTE TEMPERATURE SENSOR
1.Remove the mounting bracket. The bracket snaps on and off easily.
2. Remove the battery cover, by sliding the cover down.
3.Observing the correct polarity install 2 AA batteries. The batteries will fit tightly (to avoid
4.Replace the battery cover by sliding upwards. Be sure battery cover is on securely.
B. WIRELESS TEMPERATURE STATION
1.Remove the battery cover. To do this, insert a solid object in the space provided at the
2.Observe the correct polarity, and install 2 AA batteries.
3.Replace the battery cover.
Battery cover
Sensor signal reception icon*
*When the signal is successfully received by the Wireless Temperature Station, the icon will be switched on. (If not successful, the icon will not be shown in LCD) So the user can easily see whether the last reception was
6