La Crosse Technology WS-7215U-IT instruction manual Resetting the Mimimum and Maximum Records

are displayed. The minimum records will display for 30 seconds before returning to the normal display mode.

2.Press the OUT button again (once while “MIN” is still displayed, twice otherwise). “MAX” appears above the outdoor temperature and the LCD will flash, indicating that the maximum temperature and the time and date of occurrence are displayed.

3.While “MAX” is still displayed press the OUT button again to return to the current data display. Or you can wait 30 seconds, during either the minimum or the maximum readings, and the unit will automatically return to current data readings.

C.RESETTING THE MIMIMUM AND MAXIMUM RECORDS

1.All the Indoor records (minimum and maximum) will be reset after the IN button is pressed and held for 5 seconds.

2.All the Outdoor records (minimum and maximum) will be reset after the OUT button is pressed and held for 5 seconds.

IV. ADDING REMOTE TEMPERATURE SENSORS (OPTIONAL)

The WS-7215U-IT is able to receive signals from 2 additional temperature sensors. The following are instructions for the set-up of temperature sensor units with the WS-7215-IT. These extra sensors can be purchased through the same dealer as this unit.

1.Remove all the batteries from the receiver and sensor(s) and wait 60 seconds. During these 60 seconds, press any button 20 times to discharge any excess power.

2.Insert the batteries to the first temperature sensor.

3.Within 30 seconds of powering up the first sensor, insert the batteries to the Temperature Station. Once the batteries are in place, all segments of the LCD will light up briefly. Following the indoor temperature and

16