I n v e r t i n g t h e I m a g e
When you need to remove the projector or replace the lamp:
1Disconnect all cables.
2Hold the projector from underneath.
3Remove the knurled knob that holds the pro- jector to the mounting plate.
4Slide the projector to release it from the quick release bolts. The projector will come off of the mounting plate. The mounting plate will still be attached to the base box.
5Replace the lamp as described in your LP 425 User’s Guide if needed.
6Realign the quick release bolts in the keyhole slots on the mounting plate.
7Fasten the knurled knob.
ADJUSTING THE IMAGE
Inverting the Image
1Press the Menu button on the keypad to dis- play the projector’s
2Using the arrow buttons, move the cursor to the Controls tab to display the Controls menu.
3Move the cursor to Ceiling, then click either mouse button.
10
