Call waiting and placing a call on hold*
-This lets you put a call on hold during a conversation and answer a waiting call..
-Press the answer/end button once to put the active call on hold and answer the waiting call..
-Press the answer/end button to switch between the two calls..
-Tap the answer/end button to end the active conversation..
HOW THE STATUSDISPLAY™ WORKS
Bluetooth® | Indicates if your headset is connected to your |
Indicator | phone |
| - Solid light means headset is connected to your |
| phone |
| - Flashing light means headset is in ‘pairing mode’ |
| and ready to be connected to a new phone |
Battery | Indicates battery level and if headset is turned ON |
Indicator | - Green light indicates that the headset has more |
| |
| than 30 minutes of talk time remaining |
| - Red light indicates that the headset has less |
| than 30 minutes of talk time remaining |
To save battery the Jabra StatusDisplay™ is turned off after 3 seconds.. Get an instant status from the Jabra StatusDisplay™ by a tap on any button on the headset when you are not on a call..
HOW THE VOICE GUIDANCE WORKS
When your headset has established a connection to your phone (or other Bluetooth® device) the voice guidance will say “connected”..
When your headset has less than 30 minutes talk time remaining the voice guidance will say “low battery”..
* Phone dependent | Jabra EASYVOICE | 8 |
|
|
