After the Side Shelves have been installed, ensure the Grill Head is pushed back in the pedestal as far as possible.
With the screws removed from the securing straps, place a screw through the side of the Condiment bins and secure the Condiment Bins to the Display Panel.
Secure the Condiment
Bins to the Display Panel using the screws from the securing plates.
ROTISSERIE KIT INSTALLATION (If Equipped)
1Install the Motor Mounting Bracket supplied to the Right hand side of the Inner Hood. (If not already installed)
2Install the Motor on the Motor Bracket.
3Place the Rotisserie Rod into the Motor. Slide the Rotisserie Rod Bushing over the opposite end of the Rod and drop into the cut out provided in the inner Hood Side. Tighten the
4Place the forks and Counter Balance on the Rotisserie Rod in the desired location.
5When in use, spin the rod with your desired food until the weight of the food is at the bottom. Install the Counter Balance Straight up to effectively balance the Rotisserie system.
1 | Rotisserie Rod Handle |
2 | Rotisserie Rod Bushing |
3 | Counter Balance |
4 | Rotisserie Forks X 2 |
5 | Rotisserie Rod |
6 | Rotisserie Motor Mount |
7 | Rotisserie Motor |
11
