Operation
Some features of the Refresh Personal Hygiene System™ are designed to function only when the seat is occupied.
REMOTE CONTROL PANEL
| WARM WATER WASH | INDICATOR LIGHTS | |
| Posterior (Rear) | Feminine (Vaginal) |
|
| Cleansing | Cleansing |
|
|
|
| power |
|
| Water Temperature | power save |
|
| Low>Med>High>Off | |
LCD Panel |
| Seat Temperature | seat heat |
|
| Low>Med>High>Off | seat sensor |
|
|
| |
|
| Warm Air Dryer |
|
|
| On |
|
|
| Low>Med>High | AUXILIARY CONTROLS |
Powersave |
|
| |
|
| (backup for Remote) | |
Function |
|
| |
Decrease | Increase |
| |
| AUX Stop | ||
Stop | Water Pressure |
(for Wash and Dryer) | Adjustment | AUX Wash |
|
|
Using the Refresh Remote Control
Warm Water Washing
Sit on the seat and press the FRONT or BACK (either HIM or HER) button to begin water flow. Press STOP button to discontinue water flow.
Water Flow/Pressure Adjustment
While water is flowing, press the button to increase pressure or the | LCD Panel |
| |
button to decrease pressure. Repeat until desired pressure is reached. There |
|
are five (5) levels of water pressure. Each wider bar on the LCD graphic |
|
display represents one level increase. |
|
Pulsating Water Mode
To change to Pulsating Mode;While water is flowing, press the FRONT or BACK (either HIM or HER) button for over three (3) seconds. To deactivate and return to normal washing mode, repeat the above step.
Warm Air Dryer
Press the WARM AIR button to start dryer. Press STOP to stop the dryer.
Adjusting Seat, Water, and Dryer Temperature
You must be sitting on the seat for these functions. The last entered temperature settings are stored in memory.
Adjusting Seat Temperature
Press SEAT TEMP button to adjust temperature. Repeat until desired level is achieved. There are four (4) temperature levels: low>medium>high>off. Each wider bar on the LCD graphic display represents one level increase. No LCD graphic indicates seat heating is OFF.
View of
LCD Panel
Adjusting Water Temperature
Press WATER TEMP button to adjust temperature. Repeat until desired level is achieved. There are four (4) temperature levels: low>medium>high>off. Each wider bar on the LCD graphic display represents one level increase. No LCD graphic indicates water heating is OFF.
Adjusting Dryer Temperature
Press WARM AIR button to adjust temperature. Repeat until desired level is achieved. There are three
(3)temperature levels: low>medium>high. Each wider bar on the LCD graphic display represents one level increase.
EX93000 Refresh Installation Manual 10/06 | 5 |
|