Elara™ 6042
pure air® BathGA70 | Elara™ 6042 Pure Air® Bath, Left Hand |
GA80 | Elara™ 6042 Pure Air® Bath, Right Hand |
•Right and Left Hand Drain Location
•Accessories / Hardware:
Sch 40, Rotoary Drain Kit: #DA34
•Trim Kit Finishes Available:
(827)– Chrome
(898)– Brushed Chrome
(815)– Satin Nickel
(829)– Bright Brass
(805)– Platinum
(826)– Brushed Nickel
(845)– Oil Rubbed Bronze
60"
Installation Notes
Refer to installation instructions included with fixture before beginning installation. Please confirm product availability and specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Technical Specifications
Dimensions
60” L x 42” W x 26” H(1524) mm L x (1067) mm W x (660) mm HDrain/Overflow
A:Cutout
58” x 40” & undermount template DQ50000Total Weight
1126 lb. (511 kg) / 65 lb/ft2 (319 kg/m2)Operating Gallonage
4.2"
2"
Opt. Service
9.6" Access
Elara™ 6042,42"
12" H x 24" L Service Access
73 U.S. Gal. (276 Liters) Min 53 U.S. Gal. (201 liters) Max 92 U.S. Gal. (348 liters)
Product Weight
200 lb (91 kg)Skirt Mounting
Not AvailableElectrical Specifications
Requires a dedicated GFCI protected separate circuit. Blower: 120 VAC, 15 AMP, 60 Hz.
Heater (Standard)
No water heater is available on this unit. Blower has integral air heater.
*Measurements inside unit represent cutout in floor to allow for drain/overflow.
L
1/2" H (13 mm)
(Blower)
SIDE VIEW
W
A
|
| B |
|
END VIEW |
| ||
DRAIN/OVERFLOW |
© 2008 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com | #GD81000 01/08 |