Comfort Whirlpool Bath

English

Suction Cover/Strainer Maintenance

Clean the suction cover/strainer of hair and debris when necessary.

1Remove the center screw and detach the suction cover.

2Clean the cover by backflushing debris from the holes.

3Replace the suction cover immediately after cleaning.

When reinstalling, orient the cover/strainer with the small notch at the bottom. The gasket must be inserted into the groove of the cover/strainer before reinstalling onto the suction fitting.

Keep hair a minimum of 6 inches (152 mm) away from the suction fitting at all times when the whirlpool system is operating. Hair longer than shoulder length should be secured close to the head, or a bathing cap should be worn.

Do not operate the whirlpool system with the suction cover/strainer removed!

It is a safety device and must always be in place on the suction fitting to minimize the potential hazard of hair and body entrapment.

Suction Fitting

Suction Cover

Screw

NotchGasket

Figure 22

Troubleshooting Procedures

PROBLEM

PROBABLE CAUSES

REMEDY

 

 

 

Pump/motor does not start

No power to pump/motor

Reset GFCI

Pump/motor not plugged in

Insert plug securely into outlet

 

 

 

Ensure the control panel is conencted to control box

 

Pump/motor faulty

Contact Jacuzzi Luxury Bath @ 800-288-4002

 

 

 

Pump/motor operates but no fully adjustable jets are

Jets are closed

Open jets by rotating counter-clockwise

functioning

 

 

Suction cover/strainer may be clogged

With the motor turned OFF, remove the suction cover/

 

 

 

strainer and remove any debris. Replace the suction

 

 

cover before operating

 

 

 

Pump/motor operates but air is not injected into the

Air valves are closed

Open air control valves

water

 

 

 

 

 

Water leakage from pump unions

Overtightened, O-ring may be pinched or improperly

Loosen unions , check and reseat O-ring. If O-ring has

 

seated, undertightened

been pinched out of shape, replace (refer to number

 

 

below). When tightening union nuts, handtighten only.

 

 

 

Pump/motor shuts off by itself before time elapses

Motor thermal protection has deactivated pump/motor

Let motor cool; thermal protection will reset. Check for

 

due to overheating (supply voltage low)

proper ventilation (check supply voltage)

 

 

 

 

GFCI tripped

Reset GFCI. If it continues to trip, do not use this unit.

 

 

Disconnect the unit and have the problem corrected by

 

 

a licensed electrician before using.

 

 

 

 

Inadequate supply wiring

Consult a licensed electrician to correct the wiring unit.

Chromatherapy lights do not operate

Connector has come loose

Contact Jacuzzi Luxury Bath @ 800-288-4002

 

 

 

 

 

 

If the unit is within the warranty period, contact Jacuzzi Whirlpool Bath Service Support at 1-800-288-4002 with your bath’s serial number before work is started. The serial number is located on the Specification/Serial Number Plate.

Page 20

www.jacuzzi.com

Installation and Operation

Page 20
Image 20
Jacuzzi HE97000 manual English Suction Cover/Strainer Maintenance, Troubleshooting Procedures

HE97000 specifications

The Jacuzzi HE97000 is a state-of-the-art hot tub that redefines the standards of luxury and relaxation. Designed with advanced technology and attention to detail, this model offers users an unparalleled experience in comfort and wellness.

One of the standout features of the HE97000 is its spacious seating capacity, accommodating up to seven adults. This makes it ideal for entertaining guests or enjoying a peaceful evening with family. Each seat is ergonomically designed to provide optimal support and relaxation, with strategically placed jets that target key muscle groups for a rejuvenating massage experience.

The HE97000 is equipped with an advanced hydrotherapy system featuring therapeutic jets that can be customized to create various massage patterns. Users can adjust the intensity and direction of the jets, allowing them to tailor their experience to suit specific needs, whether it be tension relief or relaxation. Additionally, the hot tub features a unique waterfall feature, providing a soothing sound and visual element that enhances the overall experience.

In terms of technology, the Jacuzzi HE97000 incorporates a user-friendly digital control panel that allows for easy management of temperature, jet settings, and lighting. This intuitive interface ensures that users can easily customize their settings with minimal effort. The hot tub is also equipped with LED lighting options, which can be adjusted to create a tranquil ambiance that complements the relaxation experience.

Energy efficiency is another crucial characteristic of the HE97000. The unit is designed with a robust insulation system, reducing energy consumption while maintaining optimal water temperatures. This not only helps users save on energy costs but also contributes to environmentally friendly use.

Durability is key in Jacuzzi's design philosophy, and the HE97000 is no exception. Crafted from high-quality materials, the hot tub is built to withstand the elements, ensuring long-lasting performance. The exterior features a stylish cabinet that can be customized to match any outdoor setting, while the interior is made from easy-to-clean surfaces that enhance hygiene.

In summary, the Jacuzzi HE97000 combines luxurious features, advanced technology, and durable construction to provide an exceptional hot tub experience. From its spacious seating and customizable hydrotherapy options to its energy-efficient design and sleek aesthetics, this model caters to all your relaxation needs. Whether used for therapeutic benefits or social gatherings, the HE97000 is a perfect investment for enhancing well-being and enjoyment in the comfort of your home.