![](/images/new-backgrounds/1099203/9920329x1.webp)
Comfort Whirlpool Bath
3-Wall Alcove Installation
1Install the drain/overflow according to the manufacturer’s instructions. Refer also to the Technical Specifications Manual.
Watertight installation of the drain is the installer’s responsibility. Drain leakage is excluded from the Jacuzzi Luxury Bath warranty of this product.
2Install the faucet at this time. It is recommended that the faucet be installed by a qualified plumber.
3Install the flange (purchased separately) according to the instructions that are included with the kit. If the bathtub is equipped with an integrated flange, skip this step.
4Place the bathtub into the niche. Screw the flange to the wood stud. It may be necessary to shim the unit to close up any gaps between the wood stud and the flange.
5Insulation may be placed within the bathtub surround.
6Turn off the power supply to the GFCI protected circuit.
7Align the bathtub and connect the drain.
8Connect flex water supply lines to faucet and plug power cords into GFCI outlet.
9Inspect all fittings, plumbing, and control lines after inserting the bathtub to insure the components are not damaged, disconnected, or contacting the finish surface substrate or support members.
10Turn on the power supply to the dedicated GFCI protected circuits and check system operation.
11Complete all finish work around the perimeter of bathtub to seal the space between the rim and the finished deck.
| Cement Board |
| Mortar |
| Finishing |
| Material |
| Plastic Filler |
| Silicon/Sealant |
Screw | Bath Rim |
| Tile Flange |
| Stud Wall |
| 1˝ x 4˝ (not for |
| support) |
Figure 13
Tile
Stud Wall
Cement Board
Tile Adhesive
Caulking
Mounting
Screw
Tile Flange
Stud
1˝ x 4˝ (not for support)
Figure 14
English
Skirt Installation
Bathtubs with an Integral Skirt
1Screw skirt flanges into wall studs.
It may be necessary to shim the unit to close any gaps between wall studs and the flanges.
2Complete finish work over skirt flange.
3Caulk around the perimeter of the skirt to seal the space between the skirt and the finished deck.
Bathtubs with Optional Skirt
If you are installing a integral skirt, please refer to the Skirt Installation Guide before proceeding any further. Complete the installation and assembly steps according to the Skirt Installation Guide.
Finishing |
Materials |
Green Board |
Caulking Bead |
Rim of Bathtub |
Stud |
Skirt Panel |
Floor |
Figure 15
Installation and Operation | www.jacuzzi.com | Page 15 |