7 • Completing Your Installation With or Without a Light Fixture (Continued)
12
Installing the Glass Bowl
1.First install two medium base (A19) incandescent bulbs (60 Watt maximum each).
2.Attach the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.)
3.read the fan pull chain through the hole in the metal disk. en, thread the fan pull chain through the hole in the center of the glass bowl.
4.read the light pull chain through the hole in the center of the glass bowl.
5.Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl.
6.read the fan pull chain and light pull chain through the appropriate holes in the cover plate.
7.read the light pull chain through the finial and screw the finial onto the threaded rod end until tight.
Glass Bowl
Metal Disk
Light Pull Chain
Breakaway
Connector
Cover Plate
Finial
Hunter Fan Company |
