HP FCA2404 AB232A AB232A manual Installing the LightPulse Utility

Installing the SCSI Miniport Driver

Installing the LightPulse Utility

The LightPulse Utility, LpUtilNt (described in Diagnostic and Configuration Utilities, on page 37) does not automatically load. HP recommends that after loading the HBA driver, you install LpUtilNt as follows:

1.Browse to the LighPulse folder on the Smart Setup CD-ROM (or to one downloaded from the web site if it is more recent).

2.Double-click cp00xxxx.exe.

Note: Refer to the following website for the information about this Smart Component’s final version number: http://h18000.www1.hp.com/storage/saninfrastructure.html.

3.Follow the installation wizard instructions.

4.After the installation completes, you can start the LightPulse Utility by choosing Start > Programs > LpUtilNt.

AB232A PCI-X Host Bus Adapter Installation Guide 27