HP FCA2404 AB232A AB232A manual Verifying the Installation, Amber LED L1 Green LED L2 State

Installation

Verifying the Installation

To verify the HBA is properly installed and is operating:

1.Turn on the computer.

2.At power up, observe the POST LED indicators on the HBA. The position of

the POST LED indicators is defined in page 15 on page 15, and Table 2 on page 22 of this guide. The green LED indicates power functions and the amber LED signifies port activity. The amber LED blinks at all times during normal operation.

Table 3 lists normal LED indications.

Table 3: Normal POST LED Indicators

Amber LED (L1)	Green LED (L2)	State
Off	Off	Wake-up failure (dead board)
On	Off	POST failure (dead board)
Slow blink (1 Hz)	Off	Wake-up failure (dead board)
Fast blink (4 Hz)	Off	Failure in POST (dead board)
Flashing (irregular)	Off	POST processing in progress
Off	On	Failure while functioning
On	On	Failure while functioning
Slow blink (1 Hz)	On	Normal—1 Gb link rate
Fast blink (4 Hz)	On	Normal—2 Gb link rate
Off	Blink (1 Hz)	Normal—link down or not yet
		started

22 AB232A PCI-X Host Bus Adapter Installation Guide