Jacuzzi J-SHA manual Start UP Back Jets, Body Weight Range

J-Sha II Owner's Manual

START UP BACK JETS

ON/OFF BUTTON & LED

BACK JETS BUTTON & LED

ON

OFF

MIX

			TONIC
			RELAX
+			80-130
_			110-150
			130-220
+	0	_	TIME	25
_				+
+		_SPEED		+
_
		_INTENSITY
				+

TONIC/RELAX BUTTON & LED

BODY WEIGHT BUTTON & LEDs

TIME BUTTON & LED SCALE

SPEED BUTTON & LED SCALE

INTENSITY BUTTON & LED SCALE

START UP

Press ON/OFF button.

On start-up the J-Sha II will be in the default mode: BACK JET LED lights up. Back jets operate after about 2 seconds.

The TONIC indicator will be on. The flow from the jets is from the bottom upward.

BODY WEIGHT of 110-150 LED will be on. DURATION, SPEED and INTENSITY relative indica- tors will be on.

The DURATION, SPEED and POWER of the back jets have been preprogrammed for each body weight range.

The duration for 80-130 lbs. is 15 minutes, 110-150 lbs. is 18 minutes and 130 -220 lbs. is 21 minutes. The speed is the velocity at which water moves up or down on the back jets. The intensity is the water pres- sure from the jets.

During the cycle, both speed and intensity gradually increase to a maximum level determined for each body weight range.

VARIATIONS FROM DEFAULT SETTINGS

BODY WEIGHT RANGE:

Press the BODY WEIGHT button until the appropri- ate LED comes on. The duration will automatically change the length of the cycle and the maximum power of the jets.

TONIC to RELAX:

Press the TONIC/RELAX button. The RELAX LED comes on. The flow from the jets is now from top to bottom.

TIME, SPEED and INTENSITY:

Repeatedly press + or - buttons for each function. Variations from the standard value are displayed by the relative LED scales.

NOTE: During the BACK JETS (Shiatsu) cycle, the in- tensity and speed of the back jets are gradually in- creased. Any change of these values has an immedi- ate effect.

9